Dreumex One2clean
- Total concept for protect, clean and care
- Unique touch-free dispenser for optimum hygiene
- Automatic dosing guarantees efficient use: 85% cost savings
Request a quote
This touch-free dispenser is unique in the world of the dirtiest hands. The One2clean dispenser is fully automatic and activated by an infrared sensor. You don’t have to touch anything. This ensures a hygienic working environment. A dirty pump, dirty dispenser and cross-contamination are concerns of the past with the One2clean automatic dispenser. The One2clean automatic dispenser is robust, strong and easy to maintain. The integrated LED-indication shows when the batteries are almost empty or when you have to replace them. Also, the pump is easy to replace and clean.
All of this makes the One2clean automatic dispenser easy to maintain. Choosing the One2clean automatic dispenser saves you money each year. The dispensing system has a quantity control mechanism to guarantee effective use with always the right amount of soap for your needs. A delay in the dispenser ensures that it is impossible to take an unnecessary second dose immediately. In addition, there is no residue in the cartridge due an innovative pump and plunger.
| Touch-Free | Yes |
| Dosage | 3-5 ml |
Automatic dispenser
Automatic 5 ml touchfree dispenser for use with all Dreumex One2clean system cartridges except Dreumex Natural Care and Dreumex Universal Protect.
| Product Content | 1 Dispenser |
| Bar code packing | 8712602001133 |
| Packaging Content | 1 |
| Article number | 99999051025 |
Manual dispenser
Manual 5 ml dispenser for use with all Dreumex One2clean system cartridges except Dreumex Natural Care and Dreumex Universal Protect.
| Product Content | 1 Dispenser |
| Bar code packing | 8712602001126 |
| Packaging Content | 1 |
| Article number | 99999051024 |
Automatic dispenser
Automatic 1,5 ml touchfree dispenser for use with Dreumex Natural Care and Dreumex Universal Protect One2clean system cartridges.
| Product Content | 1 Dispenser |
| Bar code packing | 8712602001485 |
| Packaging Content | 1 |
| Article number | 99999051028 |
Manual dispenser
Manual 1,5 ml dispenser for use with Dreumex Natural Care and Dreumex Universal Protect One2clean system cartridges.
| Product Content | 1 Dispenser |
| Bar code packing | 8712602001478 |
| Packaging Content | 1 |
| Dimensions box (L x W x H) | 120 x 185 x 95 mm |
| Article number | 99999051029 |
Open the battery pack. You’ll see four mounting holes (left and right, top and bottom). Temporarily hold your dispenser at the desired location. Make sure the dispenser is positioned straight vertically and at least 25cm above the surface horizontally. Mark the mounting holes with a pencil. Remove dispenser from the wall and drill holes at pencil marks. Insert anchors, position the dispenser on the wall and hand tighten the screws until secure.
First, turn off the dispenser. You can do this by putting the switch on the side of the dispenser to ‘Off’. Open the battery pack, (re)place the batteries and close the battery pack. You can now turn on the dispenser to the desired dose.
We recommend using GP15A Alkaline AA +/- 2600 mAh. These will last up to 6000 – 10000 dispenses. You can use 8 other AA batteries if desired.
The recommended and included batteries will last up to 6000 – 10000 dosages.
On the right side of the dispenser, you’ll find a black switch. When you receive the dispenser, it will be in the middle on ‘Off’. You activate the dispenser by sliding it up for the large dose setting or down for the small dose setting.
Turn off the dispenser. First, you need to remove the old cartridge. Turn the cartridge 90 degrees to the right until you hear a ‘click’. The cartridge will come loose and you can take it off. Place the new cartridge on the dispenser as described above..
Turn the dispenser off and remove the cartridge. Take the pump with the long handle on the left, place it in the middle of the dispenser and make a quarter turn to the right. The long handle on the pump will point to the wall. The pump is now installed.
Turn off the dispenser and remove the cartridge. Take the long handle of the pump and lift it a little bit. Make a quarter turn to the left to loosen the pump. You can now take it out of the dispenser.
To make sure the dispenser works correctly, it’s important to keep it clean. Remove the pump and rinse it off with water. Make sure the water is less than 40 degrees Celsius and do not use any reining products. When the pump is clean and dry, place it back into the dispenser. Make sure the rubber ring is still on the inside of the pump.
Yes, you can. Important: the dispenser is tight and resistant to splashing but cannot be submerged or overly saturated with water.
The batteries are almost empty. The dispenser will continue working but you’ll have to replace the batteries soon.
The batteries are empty and the dispenser won’t work anymore. Open the battery pack, replace all batteries and close it .
On the right side of the dispenser, you’ll find a black switch. This holds three options: Large dose (big drip above) – Off – small dose (small drip below). By moving the switch up or down, you can adjust the dosage. Important: By switching the dosage half way through the cartridge, you’ll have to activate the pump a couple of times for the new dosage to take affect.
In a large dose, you use +/- 5 ml of soap and with the small dose, this is +/-3ml.
The large dosage can be used for heavy soilings in, for example, automotive or heavy industries. The small dosage is ideal for light to medium soilings in, for example, construction, agriculture, warehouses of factories. The user is the best person to estimate how heavy the soilings is and determine what dosage to use.
This depends on the use of the dispenser and the dosage (small or large). When using the large dose, you’ll get +/- 5ml per dosage. A cartridge contains 3liters. When you only use the large dose, you’ll get 600 dosages of the cartridge. With the small dose, you’ll get +/- 3ml per dosage. When you only use the small dose on the 3liter cartridge, you’ll get 1000 dosages.
Check to see if the cartridge is empty or if the batteries are empty. If the cartridge hasn’t been used for a while, the soap can dry in it. The dispenser will break off the dried soap to protect the dispenser. If this is the case, take off the cartridge and clean the pump.
By placing a new cartridge on the dispenser or switching the dosage from large to small (or vice versa), the pump always needs a couple of dispenses to produce the right amount of soap. When this happens with a cartridge you already use, it is possible that the soap dried in the pump. In that case, please clean the pump.
