Dreumex Solu Cleaner

For the removal of mineral oils and greases, bitumen, tar and rust preventative coatings.
The emulsifyers in the product help to get heavily soiled engine blocks, machinery and parts cleaned
Absorbs four to five times its own volume in oil, grease and dirt

Request a quote

Solu Cleaner is an extremely economical and efficient degreasant for the removal of mineral oils and greases, bitumen, tar and rust preventative coatings. The product is wiped, brushed or sprayed cold and undiluted onto the engines, components or surfaces to be cleaned. As soon as it has penetrated the dirt hose off with water to emulsify the soiling and leave the degreased parts or surface perfectly clean. The product is non-acid, non caustic. Apply only to solvent-proof materials, such as metals, stone, brick, concrete, glass, etc. In case of doubt, a trial should first be made, not on an obvious place. Do not use on zinc(alloy). Do not use near open fire (welding-activities, etc.) or on hot surfaces due to fire-risk. For professional use only. Contains: Naphtha (petroleum), hydrodesulferized heavy.

Solu Cleaner is a particularly economical and effective product for removing all oil, grease, lubrication and tar dirt. The product is applied cold and undiluted with a cloth, brush or sprayer to the surfaces to be cleaned. After the dirt is well saturated, it can be easily rinsed off with the water hose. Does not contain caustic acid or lye. Due to the presence of solvents, this product can only be used on parts or surfaces which are resistant to it, such as metals, stone, concrete, glass, etc. If in doubt, try it first on a non-obtrusive spot. Do not use on zinc (alloys). Because of fire hazard: Do not use in the immediate vicinity of open fire (welding, etc.) or on hot surfaces. For professional use only. Contains: Naphtha (petroleum), hydrodesulphurised heavy.